Top 12 Hoist Rings

Rigging a load is a difficult task that can end in equipment damage or a failure lift if the right gear is not used. In addition, if the load in issue must be hoisted from the sides or at an angle, rigging becomes significantly more difficult. A hoist ring is a classic piece of rigging equipment that serves as a secure spot during an overhead lift.

Browse Best Hoist Rings

Hoist Rings Buying Guide

A hoist ring is a piece of hoisting hardware that connects a rope to a hoist by screwing into an established lifting spot on a cargo. A hoist ring can pivot and spin to allow lifting at different angles without causing damage to the equipment. This guide will assist you by charting each argument you should contemplate before acquiring your hoist rings.

Your hoist ring should swivel

Hoist rings are available with either a static or swivelling base. Because of their capacity to freely spin, an operator should choose a swivel hoist ring. Often wind gusts can cause cargo to turn when it is lifted or lowered. If you utilise a non-swivel hoist ring, the cable that the load is attached to will curl. As a result, the rope is stressed, increasing the danger of failure. Swivel hoist rings address this issue by enabling the cargo to rotate without twisting the chain or cord. Thus always check whether the hoist ring you are purchasing can swivel.

Load's connection points 

When determining which sort of hoist ring to purchase, the most crucial factor to consider is whether your load's connecting linkages are on the top or side. Loads are frequently fixed on the top, and a swivel hoist ring is used. A side-pull, side-load, and flip flop hoist ring must be used on rare instances when an item cannot be raised or linked to from the top.

Double-check the quality standards

A failure in the functioning of the hoist rings could be disastrous as these tools are used to carry hefty loads. Thus, you must double-check the quality and safety standards of the product. In addition, each hoist ring must be stably labelled by the maker and demonstrate the manufacturer's name or trademark, load capacity, and torque value.