Meant to carry hydraulic fluids to different tools, hydraulic hoses are designed to function under high-pressure values. Consequently, hoses have been made available in the market only after rigorous testing of their pressure taking capabilities. However, every hose would not fit right into the purpose you want to tailor your choice. Several properties like the length, size, temperature resistance, and risk factors contribute to making a sound and whole decision. You cannot get away easily if you make one that does not cater to your needs. This guide, constructed to convey important aspects of hydraulic hoses, will discern how you could make a good choice.
How much pressure is too much pressure?
Most manufacturers will clearly mention the psi values for how much pressure the hose in question can take. You must make sure that you never overlook this specification as it decides a lot of what the hose can be used for. If you can figure out and access information regarding the psi values you might actually need for the purpose you are buying a hose for, you can maintain a safe-side approach of investing in one that can take up to 300psi values of pressure more than what you are looking for. You need to ensure that the hose has been tested well for pressure before you dive in to get one.
Flow rates and length factors
The next step must be to question yourself about whether the system you are going to attach the hose to requires a flow rate that is low or high. Accordingly, you will either need a hose with a large diameter or one with a small diameter. The latter will support high flow rates, and the former the opposite. Similarly, the length also becomes an important element. A hose has to fit and join the two points of the system perfectly. If it is too small, forcefully stretching it will significantly cut down the hose's lifespan. And one that is too large will inevitably form folds and lead to risks like abrasion.
Pinch on the pocket?
Next up, it is a prime concern to budget intelligently for a hose. Hydraulic hoses are anyway expensive. However, a good hydraulic hose will save a lot of costs later. A hose going bad can haul the workings of the entire system that can cause a huge penalty in the long run.
Categories Simillar to Hydraulic Hoses includes Air Flow Switches, Pipe Fitting Clamps and Pipe Fitting Unions